Yet Another Hobbyist Electrical Calibrator

The founder of this LLC started his endeavor in electronics in mass spectrometer business, which is sort of a metrology thing in some aspect. Later this expensive hobby expanded into electronics metrology. The hobby got more and more expensive over time and the owner of this LLC ended up purchasing a 8.5 digital multimeter and such. 

In the hobbyist metrology world, there are two most common topics. One is lowest jitter clock, the other is highest stability voltage reference. Some people also expanded their toys into resistance standard and such. 

As many years of on and off research and trials, the owner of this LLC decided to make a small integrated electrical calibration "standard" for convenience purposes or maybe it is a scheme to getting rich slowly. 

The calibrator provides reference voltage and resistance capability, but not current, as it will get too complicated with current output. 

Application:

1. Toy
2. Calibration for 6.5 digit multimeter
3. Voltage Reference
4. High Resistance Standard
5. 4 Wire Shorting Plug

Highlight:

1. Ovenized 10V Voltage Reference.
2. Buffered Voltage Reference Output.
3. Raw 6.5V Voltage Reference Output is Also Exposed.
4. Resistance Standards, including 0, 100, 1K, 10K, 100K, 1M, 10M, 100M, 1G, and 10G. 
5. 4 Wire Kelvin Connection for All Resistance Standards.
6. 4 Wire 0 ohm Kelvin Connection Shorting Plug Built in for Convivence. 
7. 12-position Mechanical Rotary Knob for Range Switching. 
8. Miniature LEMO 1S 4 Pin Connector, Compatible with Commonly Used Microvolt Meters. 
9. Cable Included with 4.0mm Banana Plugs and LEMO 1S Connector. 
10. USB Type-C Powered with Built-in Battery for Voltage Reference Operation.
11. Dimension: 2.5" x 4" x1.5".

Customization:

1. Optional Pure Copper Low Thermal EMF Output Connector Option.
2. Optional Integrated Oven for the Whole Calibrator. 
3. Custom Resistance Values
4. Traceable Calibration

For pricing, ordering and customization, please contact .